Precautions for electrostatic flocking machine

Precautions for the operation of electrostatic flocking machine

1. The planted product must be fixed or supported by an insulating object. The distance between the fixed or supporting object and the length of the flocking product must be at least 50cm. Make sure that the supporting object is insulated.

2. Confirm that the spray glue of the plant must be evenly distributed and not slip.

When flocking, it is necessary to ensure that the plant is 15cm away from the electrostatic grid and must not be approached.

4. During the process of flocking, the flocking operator must slowly rotate the plant to ensure that the flocking is evenly dense at all angles. But never approach the power grid within 15CM to avoid electric shock.

Precautions after flocking completion

After the flocking is completed, first turn off the power switch of the electrostatic flocking machine. Turn off the foot switch and adjust the gear to 0.

2. Unplug the power socket and completely disconnect the power supply. And roll up the power cord.

3. Clean up conductive objects and fluff on and around the iron mesh. To avoid neglecting safety during power on next time.

4. Clean the residual fluff adhered to the electrostatic generator, and clean the residual fluff in underground and other places.

5. Roll up the foot switch and place it properly.

6. Move the electrostatic generator away from the power outlet as much as possible.